Dimensions (hxwxd):119 x 61 x 61 cm
Material: PVC/XPS/PVC sandwich panels
Surface ~0.35 m2. Place for 9 x 6.5 ltr pots, 4 x 11 ltr pots.
Fan : GT mini fan – 185M3 per hour built into acoustically insulated damper
Filter : Prima Klima K2600 240m3
Timer : Wifi timer box
Lighting:  G-bars 170W dimmable
Incl. locks
Warranty : 1 year on technical installation

Growbox with LED, 10% Discount

This compact grow box with LED is the Bonanza Klima table model with a G-bars 170W grow lamp. When you buy this cabinet including the G-bars 170 grow light, we give a 5% discount.
So you don't pay €1169- but €1052,When you add product to shopping cart, you will get another 5% discount at cart bottom.

G-Bars 170 Watt Dimmable LED Grow Light

The best light distribution over a growing surface is obtained by working with beams or “bars”. In bars, the LED diodes are mounted on aluminum profiles that are mounted on a frame at equal distances from each other. Bars and frame of the G-Bars 170 lamp are almost as large as the floor space of the cabinet. As a result, the entire cultivation surface is evenly illuminated, with the result that approximately equal light values ​​are measured up to the farthest corners of the cabinet. This prevents plants in the center from getting more light than plants in the corners, which would lag behind in their development.
The bars are relatively long, so the LED diodes are far apart. This construction and the wide angle at which the light is emitted allows the bars to hang very close to the plants without damaging them. In this way you limit the "transport loss" and you get the best possible return from the lamp.
To hang the G-bars 170 Watt lamp, two mounting points are mounted in the ceiling. With the supplied "Light Hanger" pulley set you can adjust the lamp steplessly in height and thus always maintain the perfect distance from the plants.  Jeroen 's on-line cultivation report
proves that we didn't take any chances when choosing this lamp  .

Energy-efficient and multi-functional

The G-bars 170 Watt LED grow light is equipped with a dimmer with 4 positions. You can use this to set the lamp to 40,60,80 or 100% of the total power. This is a handy feature because the plants need less light in the early stages of the growing cycle than at the end. As the plants grow, you give them more and more light by turning the dimmer up a notch. With the dimming function you can therefore give your plants the right amount of light for every life phase. You not only create a more pleasant climate for the plants, but you also save on your electricity costs.
The dimming function also makes it possible to grow plants with different light needs. Flowering, fruit-bearing plants often need much more light than non-flowering plants such as leafy vegetables and herbs.
The full spectrum of the G-bars makes the lamp suitable for both growing and flowering plants.

Solid construction

The indestructible shell of the Bonanza Tabletop cabinet consists of aluminum profiles , plastic corner pieces and PVC/XPS sandwich plates .
Together they form an extremely solid construction that guarantees a lifetime of carefree growing pleasure.
The sandwich panels designed by us have a great light-reflecting capacity and heat and sound insulating effect. The cabinet owes its sleek appearance to the door, which is made of a solid 3mm PVC panel with an aluminum top layer. This gull-wing door with  locks  not only keeps the curious at a distance, but also gives a lot of access to your plants, so you can reach everything.
This makes the Bonanza grow box suitable for use in any interior.

Extractor, filter and muffler in 1

To remove warm air from the cabinet, the Tabletop model is equipped with a compact fan, filter and damper set . The G-tools mini air extractor of this set has sufficient capacity for cooling lighting systems up to 250 Watt. The extractor is mounted directly on a PK K2600 carbon filter . The air is therefore first sucked through the filter and cleaned of unwanted odors before it is blown out of the cabinet. Because the air extractor is mounted in a special muffler, the noise of the outgoing airflow is kept to a minimum. 45Db with closed doors 1 meter away.
With continuous use, the carbon filter will be saturated after about a year and must be replaced. This is very easy to do yourself. In our youtube channel you will find a demonstration film how to do this.
You will find the filter and the extra long cable ties for fastening in our webshop.

G-tools air intakes

When the air extractor is running and the door is closed, negative pressure is created and unfiltered air cannot escape from the cabinet. Due to the negative pressure, fresh, CO2 rich air is continuously  drawn into the cabinet via 3 G-tools air inlets . These inlets are installed at the bottom of the back wall of the cabinet and function as a labyrinth that lets air in but no light out. The filter, the point where the air is drawn in, is located at the front of the ceiling. The air is thus drawn through the box diagonally, along the plants, before being filtered and blown out without odor. This can be done directly in the room where the cabinet is placed. The Bonanza Tabletop grow cabinet does not need to be connected to air hoses that are led outside.

Wi-Fi Smart Box

A Wifi Smartbox is mounted on the ceiling of the Bonanza Tabletop mini grow cabinet. This distribution box has four sockets for the electrical equipment in the grow box. Two of these contacts have continuous voltage, one of which is used for the air extractor.
The other two contacts can be programmed via a free downloadable app and can be used to control the lighting and any watering system. When the app is installed on your smartphone, you can set the times in the world at which the lamp and pump switch on and off.
If you do not have a WiFi signal where the cabinet will be placed, you can manually switch on these two contacts permanently and use an analog time clock.